Cabinet refinishing, refacing & painting

Cabinet Refinishing, Refacing & Painting in Springfield, MO

We repaint and refinish kitchen cabinets, vanities, and built-ins for homeowners in Springfield, Missouri and the surrounding Ozarks — a fresh kitchen without tearing the old one out.

Kitchens, vanities, laundry rooms, and built-ins across Springfield, Ozark, Nixa, Republic, Rogersville, Battlefield, Strafford, Fair Grove, Willard, Branson.

We clean and degrease, sand, prime where it's needed, and spray a cabinet-grade finish on the doors, drawer fronts, and boxes. It's a good fit if your cabinet boxes are solid and the layout works, but the color or finish is dated. Not sure whether painting or replacing is right for your kitchen? Call and we'll tell you straight.

No demolition or remodel

Your boxes, countertops, backsplash, and plumbing stay where they are. We change the finish, not the kitchen layout.

Sprayed cabinet-grade finish

Doors and face frames are sprayed with a finish made for cabinetry, so it levels out smooth instead of showing brush marks or roller texture.

Kitchens, baths, and built-ins

Kitchen cabinets, bathroom vanities, laundry and mudroom cabinets, pantries, islands, and built-in shelving.

What affects the cost of cabinet painting

We don't quote cabinet work sight unseen, because the same-size kitchen can be two very different jobs. These are the things that move the price up or down — we'll walk through each one with you and put the number in writing.

Number of doors and drawer fronts

Cabinet work is priced by the piece more than by the room. A small galley kitchen and a large kitchen with an island and a pantry wall are very different jobs even though both are "one kitchen."

Condition of the existing cabinets

Heavy cooking grease, peeling finish, chipped edges, loose joints, or water damage all add cleaning and repair time before any finish goes on.

Wood species and grain

Open-grain woods like oak need extra filling and sanding steps if you want a smooth, grain-free look. Closed-grain doors need less prep.

Color and sheen choices

Going from a dark stain to a light color, or adding a second color on an island, changes how many coats are needed and how long the schedule runs.

How much you want finished

Cabinet interiors, shelving, end panels, toe kicks, and trim can be included or left out. Each one adds surface area to prep and coat.

New doors, drawers, or hardware

Replacing doors and drawer fronts, upgrading to soft-close glides, or installing new pulls adds material cost on top of the finishing work.

Ready for a number? Request a cabinet refinishing, refacing, and painting estimate or call 417-371-6930.

Our full cabinet refinishing, refacing & painting scope of work

Cabinet painting and refinishing fails when someone skips prep. Here is exactly what happens on a Repaint Springfield cabinet project, in order, from the first walkthrough to the final punch-list.

1. Walkthrough & quote

We count doors and drawer fronts, check the boxes for damage, discuss color and sheen, and hand you a fixed written price with a start date — usually on the spot — no per-hour surprises.

2. Containment & removal

Floors, counters, appliances, and openings get masked and protected. Doors, drawer fronts, and hardware are removed and numbered so every piece returns to its original opening.

3. Degrease & sand

Years of cooking grease is cleaned off with a degreaser, then every surface is scuff-sanded so the primer bonds mechanically instead of just sitting on top of old finish.

4. Repairs & grain fill

Dings, chipped edges, and loose joints are repaired. Open-grain woods like oak get a grain filler and high-build primer when you want a smooth, modern look.

5. Bonding primer

We prime with Zinsser oil-based bonding primer sprayed on all sides, then sanded smooth. This is the step that keeps the finish from peeling at the handles and edges a year later.

6. Sprayed Benjamin Moore cabinet enamel

Two topcoats of Benjamin Moore cabinet-grade enamel, sprayed — no brush marks, no roller stipple. Doors are sprayed front and back and cured on racks before handling.

7. Reinstall & walkthrough

Hardware, doors, drawers, and soft-close adjustments go back on, the space is cleaned, and we walk it with you punch-list style before we call it done.

What's included in every quote

Your written estimate itemizes the work below. If something falls outside the scope — new doors, box replacement, or a layout change — we tell you before we start, not halfway through.

  • Full masking, containment, and floor protection
  • Degreasing and scuff-sanding of every surface
  • Hardware removal, labeling, and reinstall
  • Wood repair, filling, and grain filling as needed
  • Bonding primer plus two sprayed enamel topcoats
  • New hardware installation or hole re-drilling on request
  • Interior box and shelf painting available as an add-on
  • Final cleanup and a written care and cure guide

Cabinet refacing: new doors, drawers, and hardware

Refinishing isn't your only option. If you like the layout but not the door style, we can replace the doors and drawer fronts on your existing boxes, rebuild tired drawers, and swap every hinge and pull — then spray or stain the whole set so it matches perfectly. Still far less than a full replacement, and it changes the look completely.

New cabinet doors & drawer fronts

Keep your existing boxes and swap the doors. We measure every opening, order new doors in the style and wood species you pick — shaker, raised panel, slab, or glass insert — and hang them with new hinges. It's the cheapest way to completely change a kitchen's style without touching countertops or layout.

Drawer box repair & replacement

Sagging bottoms, broken dovetails, and worn-out center-mount tracks get rebuilt or replaced. We can upgrade old wood runners to soft-close undermount glides so drawers roll smoothly and shut quietly.

Hardware: hinges, pulls & knobs

We remove dated hinges and pulls, fill and re-drill old holes when spacing changes, and install your new hardware square and level. Soft-close hinge conversions and full-overlay upgrades are common add-ons.

Refacing & added storage

Face frames can be veneered or sprayed to match new doors, and we add end panels, crown, toe kick, glass inserts, or a matching island panel so the finished kitchen reads as one custom set instead of a patch job.

Recent cabinet and kitchen work

Projects from Springfield-area kitchens, vanities, and living spaces.

View full gallery →

Cabinet refinishing, refacing & painting FAQs

How much does cabinet painting cost in Springfield, MO?
Most cabinet painting and refinishing projects we quote in Springfield fall between $2,500 and $7,000. The exact price depends on how many doors and drawer fronts you have, the condition of the existing finish, the wood species, whether you want the inside of the boxes painted, and whether you're adding a second color on an island. We look at the kitchen in person and give you a written price before any work starts.
Is cabinet painting cheaper than replacing my cabinets?
In most cases yes, because the boxes stay where they are — no demolition, no countertop removal, no plumbing or backsplash work. Replacement usually makes more sense when the boxes are water-damaged or failing, or when you're changing the kitchen layout. We'll tell you honestly which one fits your kitchen.
How long does cabinet painting take?
Most kitchen cabinet projects take about a week from start to finish. The exact schedule depends on the size of the kitchen, the condition of the cabinets, and the drying time each coat needs. We give you a schedule with your written estimate so you know what to plan around before we start.
Do you paint the cabinet doors, or just the boxes?
Both. Doors and drawer fronts are finished on both sides, and the boxes and face frames are finished in place. Painting only what you can see from the front is what makes a cabinet job look unfinished later.
Do you remove the cabinet doors?
Yes. Doors, drawer fronts, and hardware come off and get labeled so every piece goes back in its original opening. That's the only way to properly clean, sand, prime, and coat all sides.
Can you paint oak cabinets?
Yes. Oak has an open grain, so if you want a smooth modern look rather than visible grain, it needs extra filling and prep steps before the finish coats. We'll show you both options at the walkthrough so you can pick the look you want.
Can you change the color of my cabinets?
Yes — light to dark, dark to light, or a different color on the island than the perimeter. We go over color and sheen with you before anything is ordered.
How durable is the finish?
We use finishes made specifically for cabinetry rather than standard wall paint, and proper cleaning, sanding, and priming is what makes that finish stay put around handles and edges. New finishes need a cure period before heavy cleaning, and we go over simple care instructions with you at the final walkthrough.
Can you replace the doors, drawers, and hardware instead of just painting?
Yes. We can order new doors and drawer fronts in a different style, rebuild or replace worn drawer boxes, and install new hinges and pulls — filling and re-drilling old holes when the spacing changes. Everything is then finished together so it matches.
Can you refinish bathroom, laundry, and built-in cabinets?
Yes. Bathroom vanities, laundry cabinets, mudroom lockers, and built-ins are all cabinetry work we handle, often as an add-on while we're already on site.
What's the difference between cabinet refinishing, refacing, and replacement?
Refinishing keeps your existing doors and boxes and puts a new sprayed finish on them. Refacing keeps the boxes but changes the visible surfaces — new doors and drawer fronts, with the face frames veneered or sprayed to match. Replacement tears everything out and starts over. We handle refinishing and refacing, and we'll tell you at the walkthrough which one makes sense for your kitchen.
Do you do cabinet refacing?
Yes. We order new doors and drawer fronts in the style and species you pick for your existing boxes, finish the face frames to match, and can add end panels, crown, or glass inserts so the kitchen reads as one set. It's a common choice when the layout works but the door style is dated.
How do I get an estimate?
Call 417-371-6930 or send us your project details through the quote form. We'll set up a time to see the cabinets, talk through color and scope, and put the price in writing.

Still deciding between refinishing and new cabinets? Read our cabinet refinishing vs. replacement guide.

Painting cabinets often goes hand in hand with interior painting in Springfield, MO and new trim and door work. You can browse more finished projects in our gallery or contact Repaint Springfield with questions.

Ready to see your kitchen refinished?

We'll look at your cabinets, talk through color and sheen, and put your estimate in writing. Call 417-371-6930 or request a quote online.